An Easy Way to Make a Cup Holder for Your Lawn Mower
When you’re out mowing your lawn during the hot summer days, there’s nothing better than having a cup of water with you. But what if your lawn mower doesn’t have a cup holder? Why you can follow our example and create one that works just fine, thank you very much! The following steps will help you create a fantastic cup holder for lawn mower models like yours.
Why a Cup Holder for Lawn Mower Models is a Good Choice
This simple project is something that just about anybody can handle with little difficulty. But why should you even bother with it in the first place? Well, there are many benefits to building a cup holder for lawn mower designs like yours. Understanding these benefits can help you get the most out of this project and ensure that you feel comfortable starting it, based on your skill with various tools.
Keeps You Hydrated
The hot summer sun is both your best friend and worst enemy when you’re mowing your lawn. It’s your best friend because it will keep you warm and comfortable but your worst enemy because it can cause major dehydration issues, especially if you plan on mowing a fairly large lawn.
Thankfully, a cup holder can help you avoid this problem by keeping fresh water near you at all times. We strongly suggest that you enjoy water when mowing, though a soda or even a beer can be a relaxing option for those hot summer days when the sun just beats down on you something fierce.
Avoids Frequent Breaks
While you can always hop off your mower and go get a glass of water, doing so will add to your mowing time. For example, if you have a large lawn, and you’re stopping every half hour, you’re adding precious minutes to your mowing time that could spiral into half an hour or more.
Why not avoid those breaks by getting a great cup holder and putting it on your mower? If you still need over one drink while you ride, you can put a cooler with fresh water (or other beverages) outside with ice to shorten your walk time into the house and speed up your mowing times.
Gives You a Fun Project
Are you someone who likes having projects to do, and you’ve just about run out of ideas for improving your lawn mower? You’ve already increased its power and taken steps to keep leaves out of its deck. Why not have a little fun by adding a cup holder to the mower this summer?
This project is one that should take just an hour or two, depending on how comfortable you feel working with wood or other similar materials. It is also something that you can do with friends or even your kids, depending on how much they enjoy working with you on hands-on projects like these.
How to Add a Cup Holder for Lawn Mower to Your Ride
In this section, you’ll learn how to build a cup holder for lawn mower use using plywood, magnet, glue, and sandpaper. This project is something that you can probably do in an hour or two if you feel comfortable working with saws. Try to work with a partner to ensure that you can safely hold your materials and cut them evenly while you work. Doing so can keep you safe from injury.
Materials and Tools You’ll Need
- A large sheet of three-quarter-inch plywood (at least 30 by 30 inches)
- Four half-inch magnets that are stronger than traditional refrigerator magnets
- Fine sandpaper to smooth down the edges of this project
- A powered handsaw to cut your wood into pieces
- Wood glue powerful enough to hold for years
- Paint and paintbrushes to decorate the cup holder
- Rubber to put on the top where you can rest your drinks
Steps to Follow When Building Your Cup Holder for Lawn Mower Design
- Cut four pieces of five-by-seven-inch wood to form your cup holder
- Carefully sand these edges to ensure that they are smooth and easy to glue together
- Place glue along the ends of your wood pieces and glue them in a simple square shape
- Glue the magnets to the sides of the cup holder so it will stick to the metal on your lawn mower
- Sand the edges to give them an appealing rounded shape that evens them out a bit
- Paint the cup holder any color that you like, adding decorative design elements
- Cut rubber strips to line the top of your cup holder
- Glues these strips to the top of the cup holder to provide a drink rest
- Cut a wood piece large enough to cover the bottom of the cup holder
- Glue this piece to the bottom of the holder and paint it for decoration
- Place your cup holder to your lawn mower by the magnets to hold it in place
Tips to Keep in Mind
If you want to add a cup holder for lawn mower to your next project list, you should make sure to keep the following tips in mind. These simple ideas will ensure that you get the best results possible from your project and ensure that you feel comfortable with it. They’re the kind of steps that you should naturally consider when deciding to handle upgrade projects to your lawnmower.
Don’t Neglect Pre-Built Pieces
Whenever possible, try to invest in pre-built pieces for your cup holder. Shops near you may have interesting options that cut back on the building time that you need to invest in this project. It is particularly nice to consider this option if you feel uncomfortable working with materials like these yourself and need a little help executing your project smoothly and efficiently.
Experiment With Magnet Power
There are many different magnets that you may want to add to your cup holder project. These include traditional refrigerator magnets, which may not be powerful enough to hold up your drink. It all depends on what kind of drink you plan on adding to the lawnmower. Note that a rider mower may have fewer problems with this issue because they can sit on the mower and use the magnets as extra holding power.
Replace Your Wood With Metal Sheets
Do you want an all-weather cup holder that will last far longer than wood? You can try aluminum sheets, instead of wood, to build one that will last you a very long time. Note that it will be a bit trickier to cut aluminum and will require specialized saw blades designed to cut metal. Thankfully, these should be available at your local hardware store and aren’t hard to install if you know what you’re doing.
