10 Problems Associated with the Kubota Zero Turn Mower
If you own a Kubota Zero Turn Mower, you’ve probably already experienced some common problems associated with these mowers. Whether it’s a stall when turning too sharply, issues with the cutting blades, or problems with the fuel system, these mowers can be pretty frustrating to work with.
One of the most common problems associated with Kubota Zero Turn Mowers is stalling when turning too sharply, hydraulic or mechanical. This problem can be caused by several factors, such as low fluid levels in the hydraulics or worn-out engine parts. Regularly performing checks can help you catch any issues before they become too serious.
So, if you’re looking to find solutions to your Kubota Zero Turn Mower problems, we’ll provide some tips and tricks to help you get your mower back in good working condition.
1. Kubota Zero Turn Mower Won’t Start
If your Kubota Zero Turn Mower is having problems starting, it’s often due to low or dirty fuel. Make sure you’re using high-quality fuel when operating your mower, and clean out any old fuel that may still be in the tank before adding new fuel.
This can be done by disconnecting the fuel line and running your Kubota Zero Turn Mower until it runs out of gas. Then, use a funnel to add fuel to the tank, being sure to prime the system before starting the mower again.
The Kubota Zero uses oil and air filters to keep the engine running smoothly. Make sure you replace these filters regularly, as they can easily become clogged or dirty if not properly maintained.
2. Weird Sound Coming From Kubota Zero Turn Mower
Bear in mind that if your Kubota Zero Turn Mower begins making odd noises, for example, grinding or squealing, this might indicate issues with the cutting blades and other engine parts.
You must remove the deck and inspect the blades to resolve this problem. If they are bent or otherwise damaged, replace them with new ones- ensure they fit properly before attaching everything back together again. Also, inspect the rest of the engine to ensure there are no other issues.
You may need to consult Kubota’s manual to remove the deck, as this process can be complicated. If you’re unsure how to proceed, it might be best to have a professional help you. If none of these issues seem to be causing problems with your Kubota Zero Turn Mower, then it’s likely that you’ll need to take it in for professional servicing.
3. Handles Become Stiff With Use On Kubota Zero Turn Mower
Suppose your Kubota Zero Turn Mower handles become stiff or difficult to use over time. In that case, this may be due to a buildup of debris in the hydraulics. Or, it could indicate that the mower’s handles are wearing out.
To clean your Kubota Zero Turn Mower‘s hydraulics, you’ll need to disconnect the hoses and flush them with a mixture of water and soap. Check for any leaks before reconnecting the hoses. Then, run your Kubota Zero Turn Mower again to ensure it’s working properly.
If it’s the handles, you’ll need to take them off and inspect them for wear or damage. If they seem in good shape, you can apply a lubricant to help them move more smoothly. But if they seem worn or damaged, you may need to replace them entirely.
4. Hydraulic Transmission Starts Acting Up
This could be caused by a problem with the hydraulic fluid. You will need to check and refill the fluid levels and replace any dirty or old fluid in the tank before reconnecting it to your Kubota Zero Turn Mower.
You can do this by disconnecting the tubing and removing the tank cover. If none of these solutions seem to be working, then it may be time to take your Kubota Zero Turn Mower for professional servicing.
5. Smog Issues
If you notice a strong smell of gasoline coming from your Kubota Zero Turn Mower, this could indicate an issue with the fuel system. The fuel system is responsible for burning the gasoline and creating exhaust, so keeping this system in good condition is important.
You’ll need to check the carburetor and ensure it’s not clogged or dirty. Cleaning a carburetor is a fairly simple process. You can typically find detailed instructions online to walk you through the process.
However, here are some simple step-by-step guides on how to clean it:
- Remove the carburetor from your Kubota Zero Turn Mower.
- Use a carburetor cleaner such as carburetor spray, making sure to follow the instructions on the label.
- Allow the cleaner to sit for at least 10 minutes before cleaning out any dirt or debris within the carburetor.
- Reattach the carburetor and run your Kubota Zero Turn Mower for a few minutes to ensure it’s working properly before putting it back into use.
6. Uneven Cutting Due to Damaged Blades
Grass being unevenly cut is generally a sign that the blades on your Kubota Zero Turn Mower are damaged or worn down. To fix this problem, you’ll need to remove the deck and check the blades for wear and damage. If bent or broken, replace them with new, high-quality Kubota Zero Turn Mower blades that fit properly.
The Kubota should have a support page where you can contact them for blade replacements. If not, then you may need to purchase them online or from your local hardware store.
7. Overheating Due to Moisture Buildup
Overheating or running more slowly than usual could signal moisture buildup within the engine. This happens when the Kubota Zero Turn Mower isn’t adequately cooled down, and warm air is trapped inside the engine.
To address this issue, you’ll need to remove the spark plug wires and clean away any debris or buildup that may have accumulated in the engine. You can do this by spraying a small amount of engine de-greaser into the spark plug hole and scrubbing it away with a soft brush.
After that, reconnect the spark plug wires and run your Kubota Zero Turn Mower again to see if the problem has been resolved.
8. Clogging Due to Engine Speed
If you find that your Kubota Zero Turn Mower is frequently clogging or is harder to start, this could be a sign that the engine speed is too high.
You’ll need to adjust the throttle setting on your Kubota Zero Turn Mower by following your owner’s manual instructions to fix this problem. This can be done by doing the following:
- Turn off your Kubota Zero Turn Mower and disconnect the spark plug wires.
- Adjust the throttle setting until it is at an appropriate level for your specific Kubota Zero Turn Mower model.
- Reattach the spark plug wires and start your Kubota Zero Turn Mower to ensure it works properly.
If, after making these adjustments, you continue to experience issues with clogging or difficulty starting your Kubota Zero Turn Mower, then it may be time for professional help.
9. Hydraulic Fluid Change Issues
If you are experiencing issues with your Kubota Zero Turn Mower‘s hydraulic fluid, this could be a sign that it needs to be changed.
You’ll need to drain the old fluid from the tank and replace it with new hydraulic fluid. You can typically find detailed instructions for changing hydraulic fluid online or in your Kubota Zero Turn Mower owner’s manual.
However, here are some simple steps to help you get started:
- Disconnect your Kubota Zero Turn Mower from the power supply and allow it to cool completely.
- Locate the procedure for draining hydraulic fluid in your Kubota Zero Turn Mower owner’s manual.
- Follow the procedure to drain the old hydraulic fluid, making sure to dispose of it properly according to local regulations.
- Once the tank is empty, fill it with fresh hydraulic fluid and reconnect everything as described in your Kubota Zero Turn Mower owner’s manual.
- Run your Kubota Zero Turn Mower for a few minutes and check to make sure that the hydraulic fluid is now flowing properly.
10. Loose Fuel Lines or Hoses
Fuel leaking from one of your Kubota Zero Turn Mower‘s hoses or lines could signify that they are loose or damaged. Hoses and lines often get damaged from use. It’s important to inspect them regularly for any signs of wear and tear.
You’ll need to check the Kubota Zero Turn Mower‘s hoses and lines for signs of damage or looseness and replace any faulty parts as needed. A fuel line or hose costs only a few dollars, so keeping your Kubota running is worth the investment.
Finally, regularly inspect your Kubota Zero Turn Mower hoses and lines for any wear or damage so that your Kubota will continue to run smoothly and efficiently.
You can also read:
